Tesla has quietly switched on a new feature for the Powerwall 3 and Powerwall 3P called Heat Pump Optimization. The pitch, laid out on Tesla's German support site and in a short post from the Tesla Energy account, is that your home battery can now tell a compatible heat pump to run harder when solar is abundant or power is cheap, banking the extra energy as hot water instead of just topping up the battery. It's a neat idea. We checked whether it actually works the way it's described, and whether the numbers behind it stack up.
The mechanics are real. Tesla's own support page confirms the feature needs a Powerwall 3 or 3P on firmware 26.26 or later, the Tesla app on version 4.59.1 or later, and a heat pump that's SG-Ready certified with an accessible "SG-2" contact, wired up by a Tesla-certified installer. The Powerwall tracks solar output and, in some modes, a 24-hour price forecast, then sends one of two signals: run in normal mode, or boost. Boost pushes the heat pump to heat water further than the household currently needs, banking it in a tank for the expensive hours ahead. Tesla is upfront that these are only recommendations, the heat pump's own thermostat can override them, and there's no on/off toggle in the app.
The energy maths checks out. Electrek, which first reported the feature, worked out that a 300-litre tank heated an extra 30°C stores about 10.5kWh of heat, and that a heat pump running at a typical coefficient of performance of 3 only needs to draw around 3.5kWh of electricity to put that heat in the tank. We redid that arithmetic independently and it holds up: 300kg of water times its specific heat capacity times a 30°C rise comes to roughly 10.5kWh of stored thermal energy, divided by a COP of 3 gives about 3.5kWh of electrical input. That's a genuinely cheap way to bank surplus solar, provided the household actually uses enough hot water to draw it back down.
What's missing from the "new feature" framing is the history. The SG-Ready interface this all runs on isn't a Tesla invention, it's a German standard introduced back in 2012 by the German Heat Pump Association (BWP) together with 17 manufacturers, and it's been sitting in heat pumps across Germany, Austria and Switzerland ever since. Tesla isn't even first to connect a home battery to it: German rival sonnen started networking customers' heat pumps into its virtual power plant in June 2023, three years before this Powerwall update, using the same kind of smart-grid-ready signalling. None of that makes Tesla's version pointless. It does mean "Heat Pump Optimization" is Tesla catching up to a market that already existed, not creating one. It's also currently confirmed only for Tesla's German-language site, with no word yet on the US, Canada or Australia.
The bottom line: Heat Pump Optimization is real, it works roughly as described, and the energy savings maths behind it is sound. But it leans on a 14-year-old German standard, and at least one competitor built the same kind of integration years earlier. Call it a solid update to the Powerwall, not a breakthrough, and don't expect it in Australia any time soon: SG-Ready isn't a standard used here, and Tesla hasn't said a word about bringing the feature to this market.