The Clean Energy Regulator carried out 1,278 compliance inspections of home battery systems installed under the federal Cheaper Home Batteries Program between July 2025 and April 2026, a sample of roughly 0.5 percent of the more than 250,000 systems installed under the scheme. The headline figure: 60.8 percent of inspected installs were substandard, and 1.2 percent were flagged outright unsafe.

What "substandard" actually means: most of it was labelling, missing warning labels or unlabelled backup circuits, lower-risk paperwork issues rather than fire hazards. The more serious slice involved loose or exposed wiring and poor electrical work that could cause overloading, degraded performance, or in the worst cases, fire. The regulator was clear that the problem sits with installation quality, not the batteries themselves, and pointed to electrician shortages, high demand stretching trades thin, and a handful of "rebate chasers" misusing the scheme as likely contributors.

Caveat worth stating plainly: 1,278 inspections out of 250,000-plus installs is a small sample, and the regulator itself cautions against over-extrapolating. If the same rates held across the full rollout, that implies roughly 152,000 non-compliant installs and 3,000 unsafe ones nationally, a large number in absolute terms even though the underlying rate is based on a small slice.

What this means if you're getting a battery installed: use an accredited installer who's been vetted, not whoever's cheapest or quickest to turn up. Ask to see photos of their previous jobs, a tidy install with no exposed cabling is a decent sign of a careful tradesperson. The Clean Energy Regulator publishes a Solar Battery Inspections Checklist worth running through before signing off on the job. As the regulator's own guidance puts it: no amount of exposed cable is compliant. This is advice every diesel mechanic will recognise, a rushed install done by someone cutting corners causes more problems down the track than the job was worth saving time on.